11
Application examples
Example 2: Meeting room
Example 2 shows a more advanced application for a typical meeting room. Two EBDSPIR-AT-AD sensors are used, set
-up for Absence detection.
One sensor controls the six downlighters via Channel 1 (switched output) and two wall lights via Channel 2 (dimmed
output). The other sensor controls the striplight over the whiteboard via Channel 1 (switched output) and the other two
wall lights via Channel 2 (dimmed output).
Fully independent control of all four circuits can be provided with suitable scene programming. Scene selection and
manual control of all circuit levels can be achieved via an IR Handset.
In addition, this example shows two AT-BB-IN input units used in conjunction with wall mounted button plates to provide
manual selection of scenes.
Since the detectors are in Absence detection mode, lights will only turn on in response to manual operation of the button
plates or IR Handset. If no movement is detected for the specified Time Adjustment Period, the lights will automatically
turn off.
