7
Basic programming
Step 1: Set channel addresses and channel load type
The Sensor has two output channels:
Channel 1 - Switched Output
Channel 2 - Dimmable Output
and one input channel:
Channel 3 - PIR Sensor
To relate the function of different channels it is necessary
to set the addresses correctly. For example, a scene
select message sent from a device with a Local Code of 1
will only be actioned by devices that also have a Local
Code of 1.
To program the settings for a specific channel on the
Sensor you must specify the appropriate channel number
(i.e.1 to 3) using the programming device.
If no channel number (or channel 0) is specified, all
channels will be set to the same address.
The output channels also have Circuit numbers. This
allows different physical channels to be linked and
controlled as a single Circuit.
Channel 2 (the dimmable output) can control 1-10V
ballasts.
Note: for applications where there is only one channel of lighting
being controlled in a room there is no need to select the channel
number.
