ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
73
6.7.3
Group and Subgroup configuration
Figure6-28 :
Configurations for Subgroup
The
group/subgroup
configurations
can
be
done
on
the
Group/Subgroup Setting page. Please select the group/subgroup first
and click on the function button to perform the configurations:
Change Name
：
Click the radio button in front of the group
and click on “Change Name” to change the name of selected
group. Click “OK” button to save the changes.
Move Up
：
Click the radio button in front of the group name
and click on “Move Up” to move the group to upper order
(upper index number (No.)).
Move Down
：
Click the radio button in front of the group
and click on “Move Down” to move the group to lower order
(lower index number (No.)).
Copy
：
To copy the settings of a pre-set group to the new
group, please click the radio button in front of the pre-set
group and then click on “Copy”, a new group (in sequence)
will be added to the list and the settings of the old group will
be copied to this newly added group.
Remove
：
Click the radio button in front of the group and
click on “Remove” to remove the selected group.
Close
：
Click the “Close” button to return to group setting
page.
6.7.4
Setup the loops/phases of the subgroup
i
Click the “Set up” button (
) of subgroup to open the setting
window.
