ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
166
After complete Email Address setting, continue to input Email Content
setting. Enter the email subject in the “Subject” field. The Email
Content Setting page is shown as below:
Figure10-5 :
Email setting page(Email Content)
xiii
Enter the content in the “Content” section. In addition, it provides
encoded strings for users to add current I/O channel value, power data
or Internal Register value into the Email content. To make it easy to
add the encoded string, PMC provides “Real-time variable editor”.
Please refer to "
“ for more detailed information
of the “Real-time variable editor”.
xiv
Click on “OK” to confirm the setting and leave the setting page.
xv
Repeat steps i~ xv to complete settings of all Emails
To modify the settings of a pre-set Email, please click on the radio
button in front of the Email, and then click on “Setting” to modify the
settings.
xvi
To copy the settings of a pre-set Email to the new Email, please click
the radio button in front of the pre-set Email and then click “Copy”, a
new Email will be added to the list and the settings of the old Email
will be copied to this newly added Email.
xvii
To remove a pre-set Email, please click the radio button in front of the
pre-set Email and then click “Remove”.
xviii
After you finish all the Email selections and settings, click “Save”
button to save the settings.
