ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
213
Figure11-20 :
Mobile Network Signal Strength condition setting page
Follow the steps below:
i
Select the unit that you are going to use for IF condition statement.
The interface provides dBm and Percent(%) for selection.
ii
Set up the expression statement for the Mobile Network Signal
Strength value. Select an operator from “=”, “>”, “=” or “<=”.
iii
Specify the evaluation value. If the Mobile Network Signal Strength
value match the evaluation criteria, the result of this condition
evaluation will be “true”.
iv
Click “OK” button to confirm the settings and return to the Rule
settings page.
11.1.11
FTP Upload Status
The status of FTP Upload Status can be used as evaluation criteria for
IF condition statement; the editing page for FTP Upload Status
Condition Setting is shown as follow:
Figure11-21 :
FTP Upload Status condition setting page
Follow the steps below:
i
In the “Status” field, set up the maximum allowable idle time period
when fails to upload files via FTP; once the time period reaches the
maximum allowable idle time period, the result of this condition
evaluation will be “true”.
ii
Click “OK” button to confirm the settings and return to the Rule
settings page.
11.1.12
SD Card Status
The status of SD Card can be used as evaluation criteria for IF
