ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
218
THEN/ELSE Action are as follow:
One-Time: when the IF Condition is TRUE, this Action will be
executed once and only once. This Action will not be executed again
until the IF Condition turns to be TRUE again.
Repeat: when the IF Condition is TRUE, this Action will be executed
repeatedly until the IF Condition turns to be FALSE.
The setting options of THEN/ELSE Action are as follow:
11.2.1
ICP DAS Module
Click on ICP DAS Module(XV-Board/M-7000/DL), 3 options will
appear as the following: DI Counter, DO, and AO.
11.2.1.1
DI Counter
You can reset DI counter of the XV-Board/M-7000 modules in the
THEN/ELSE Action statement; the editing page for DI counter
Action is shown as follow:
Figure11-27 :
DI Counter action setting page
Follow the steps below:
i
Select the DI channel to reset DI counter from the dropdown
list of channel field in the “Module & Channel” section.
ii
Click “OK” button to confirm the settings and return to the
Rule settings page.
11.2.1.2
DO
You
can
execute
an
action
in
DO
channel
of
XV-Board/M-7000/DL module in the THEN/ELSE Action
statement; the editing page for DO Action is shown as follow:
