PCI-1202/1602/180x Series Card
Multi-Function Boards
User Manual/ Ver. 4.8/ Mar. 2015/ PMH-0014-48/ Page: 45
3.
Wire the digital multi-meter to D/A channel_0, and then keep set the
J1
jumper to
10 V
voltage
(refer to
Sec. 2.2.2
), and wire the signals as follows:
The PEX-1202 and PCI-1202/1602/1802 Series :
Connect the
positive probe (+) of Multi-meter
to D/A_out0 (Pin 18).
Connect the
negative probe (-) of Multi-meter
to A.GND (Pin 17).
The PCI-1800 Series :
Connect the
positive probe (+) of Multi-meter
to D/A_out0 (Pin 30).
Connect the
negative probe (-) of Multi-meter
to A.GND (Pin 29).
