Chapter 4
iCAM-7
60D User’s Manual ICP DAS
Setup
76
4.4.3 Snapshot Tab
The
Snapshot
tabbed pane sets the Camera to take snapshot images when event
is triggered.
The Snapshot event trigger methods:
1. Always
2. Schedule
3. Motion
4. GPIO Input
The settings about the Snapshot event triggered
1.
Time Lapse
: scheduled time and capture interval
2.
Number:
single snapshot or 6 snapshots
3.
Target
: defining the video record file target destination.
Always:
Under this method, the Camera automatically continuous to capture
snapshots of the area under surveillance at every 1, 2 or 3 seconds
interval.
Time Lapse
: Snapshot is triggered at every 1, 2 or 3 seconds intervals.
Target
: The stream of accumulated snapshots may be stored in the SD
Card, Remote Disk, sent to host by E-mail, FTP as preferred or
through all of them.
