ET-87P2/4/8 Series User Manual, version 1.0.1 Page: 16
Copyright © 2011 ICP DAS Co., Ltd. All Rights Reserved. E-mail: [email protected]
LED Displays
The LED displays (5-Dgital 7-Segment LEDs) show the I/O configuration error,
warning status or IP settings.
Status Indicators
The indicators indicate which the parameter is displayed in LED displays and
whether the power is on or not.
Status Indicator
Description
IP
The IP indicator indicates the IP address which is
displayed in LED displays.
Mask
The Mask indicator indicates the Mask which is displayed
in LED displays.
Gateway
The Gateway indicator indicates the Gateway which is
displayed in LED displays.
Power
The Power indicator indicates whether power is on or not.
Function Buttons
The function buttons allow the user to navigate through the configuration and or
adjusting set-points.
Function Button
Description
Mode
The Mode button switches to the configuration mode. If
already in configuration mode, the set-point will move to
the next configuration parameter.
UP
In configuration mode, the UP key scrolls through the
parameter value, and can increase the parameter values.
Down
In configuration mode, the Down key scrolls through the
parameter value, and can decrease the parameter
values.
SET
The SET button shows the parameter values in the LED
display.
If in configuration mode, the SET button will move the
set-point.
