ET-87P2/4/8 Series User Manual, version 1.0.1 Page: 41
Copyright © 2011 ICP DAS Co., Ltd. All Rights Reserved. E-mail: [email protected]
Step 2: Push MODE button to entry control and then use control
buttons to configure IP address
Entry control
After push the Mode button, then start configure the IP settings and remote I/O port
number.
In this case, the LED displays show the IP address as 192.168.255.1 and the port
number as 9999.
IP Address (192.168.255.1)
Remote I/O port number (9999)
Control buttons descrition
MODE:
Skip to the configure the subnet mask
UP:
Increase the value
DOWN:
Reduce the value
SET:
Save the configuration and skip to the next point
