![background image](http://html1.mh-extra.com/html/icp-das-usa/can-8124/can-8124_user-manual_3568919066.webp)
CAN-8124/CAN-8224/CAN-8424 User Manual
CAN-8124/ CAN-8224/ CAN-8424 User Manual (Version 2.0, Aug/2007)
66/153
5.6 CAN-8424 Configuration (On-line mode)
Before using the CAN Slave utility in the On-line mode with the CAN-8424,
please make sure that you have connected the COM1 port of the CAN-8424
with the available COM port on your PC. The architecture is displayed in the
following figure. In this demo, the CAN-8424 will be used, and slot modules,
I-8057, I-8053, I-8024 and I-8017H are plugged into slots 0, 1, 2 and 3
respectively.
Step 1: Turn off the CAN-8424. Set the “DR” rotary switch for the CAN-8424 to
9. Then turn on the CAN-8424.