Configuring and managing the IGW3000
19
Figure 13. Access List tab in the Wifi menu
2.
Go to the Rules area which contains the access list for your interface. If two interfaces are
available on the IGW, then two Rules areas are displayed and the relevant interface name
is shown in parentheses following the Rules title.
3.
In order to set a limit of clients connectible via wireless interfaces, tick the Client limit box
and enter the desired client limit value. The maximum value is 255 clients.
4.
Use the appropriate radio button to define the desired behaviour of the access list:
• None: completely disables the access list.
• Allow: allows only the devices in the access list to connect to the interface.
• Deny: prevents the devices in the access list from connecting to the interface and allows
all the other devices to connect to it.
5.
Check the appropriate check box in the Enabled column to activate the access list entry for
editing. Use the following options to add the Wi-Fi device to the access list:
• Name: used for your reference. Should be set to a meaningful string that allows to identify
a particular device, e.g. “my Lenovo laptop” or “my iPhone”.
• Mac Address: physical address of the wireless adapter in your device. The valid
address must be specified as a string of six octets separated by colons or hyphens, e.g.
02:00:54:FF:4E:01 or 02-00-54-FF-4E-01. The method to determine this address varies
