manualshive.com logo in svg

Icop VDX-6318, Getting Started Manual, Page: 74 / 114

Share
Download
Icop VDX-6318 Getting Started Manual Download Page 74

 

VDX-6318 Windows Embedded Compact 7 - Getting Started Guide 

Windows Embedded Compact 7 Getting Started Rev 2.00 

Page 74 

 

Congratulations! – 

You’ve completed all the steps  

You completed all the steps in this guide. 

 

Develop, configure and customize a Compact 7 OS design project. 

 

Generate Compact 7 OS run-time image from the OS design, establish connectivity and 
download the OS run-time image to a target device. 

 

Develop Compact 7 native and managed code application using Visual Studio 2008, establish 
CoreCon connectivity and deploy the application to the target device. 

 

Configure the OS design with KITL to generate a Compact 7 OS run-time with KITL enabled, 
download the KITL enabled OS run-time to the target device and use remote tools to debug the 
image remotely. 

This is just the beginning.  The primary objective for this getting started guide is to help developer new 
to the Compact 7 development environment to get started with Compact 7 development quickly.  There 
are advance subjects, not covered in this guide, which you need to pursue to further your knowledge.   

Every embedded development project involves different hardware and application scenario.  When 
starting an embedded development project, it’s important to select the appropriate hardware platform 
to establish an effective and efficient development environment with all of the needed components.  
Here are some addition subjects Compact 7 developers should know: 

 

How to deploy application to a Compact 7 device for distribution 

 

How to support and provide update to a Compact 7 device in the field 

 

Develop Real-time application for Compact 7   

 

Web Services for Device for Compact 7 

 

Silverlight for Windows Embedded 

 

Etc…  

For additional information resources relate to Windows Embedded, visit the following Microsoft 
Website: 

    

http://www.microsoft.com/windowsembedded/en-us/develop/windows-embedded-products-for-developers.aspx

  

Additional Windows Embedded Compact information resources are provided in appendix C. 

To learn more about the VDX-6318 and other Single-Board-Computer from ICOP, visit the following Web 
sites. 

http://www.icoptech.com

  

http://www.embeddedpc.net/VDX6318MSJK/

 

 

 

 

Summary of Contents for VDX-6318



















































































































Reviews:

No comments