VDX-6318 Windows Embedded Compact 7 - Getting Started Guide
Windows Embedded Compact 7 Getting Started Rev 2.00
Page 61
Preparing Target Device to Connect to VS2008 IDE
The VS2008 Managed code development environment uses CoreCon to establish connectivity
between the VS2008 IDE and the target device, similar to the CoreCon used for the Native code
application exercise in Part-9 of this guide. Follow and use the same steps from the native code
application section to configure the VS2008 device connectivity settings.
Note:
If you are continuing from the previous VS2008 native code exercise, using the same instance of
Compact 7 device, the device connectivity settings are already configured.
Establish Connectivity to Compact 7 Target Device
To initiate connectivity to the target device, from the VS2008 menu, select
Tools → Connect to
Device
to bring up the
Connect to Device
screen, as shown in Figure 59.
Fig. 59 -
Connect to Device
If it’s not already selected, select
Vortex86DX_SDK_Compact7
from the Platform selection.
Click
Connect
to establish connectivity, and bring up the
Connecting
screen.
Upon a successful connection, the
Connecting
screen displays the
Connection succeeded
message, as shown in Figure 60.
Fig. 60 -
Connection succeeded
Click
Close
to close the
Connecting
screen and continue.