VDX-6318 Windows Embedded Compact 7 - Getting Started Guide
Windows Embedded Compact 7 Getting Started Rev 2.00
Page 41
Fig. 28 -
Ethernet Download Settings
Click and highlight the device ID listed in the
Active target devices
windows to associate the
device ID to the profile.
Click
Apply
to continue.
Note:
In the environment where there are multiple target devices connected to the same network
segment booting up and send bootme requests at about the same time, multiple device IDs will be
listed in the Active Devices windows. To identify the target device you are working with, make sure
it’s the only target device booting and sending the bootme request.
After the device ID is detected and accepted in the
Active target devices
step, the same device ID is
now shown on the
Target Device Connectivity Options
screen, as shown in Figure 29.
Fig. 29 -
Ethernet Download Settings
Click
Apply
and
Close
to save the settings and close the
Target Device Connectivity Options
screen.