VDX-6318 Windows Embedded Compact 7 - Getting Started Guide
Windows Embedded Compact 7 Getting Started Rev 2.00
Page 53
Since the Compact 7 OS run-time image launched on the target device is built with the
AutoLaunch
and
Autolaunch CoreCon
components, the target device is configured with CoreCon launched and is
ready to establish connectivity to the VS2008 IDE.
In order to establish CoreCon connectivity, you need to know the Compact 7 target device’s IP
address. Work through the following steps to find out the IP address:
With Compact 7 running on the target device, from the Compact 7 desktop, click on
Start →
Run
and launch the
CMD
command to launch the command console window, as shown in
Figure 45.
Fig. 45 -
Compact 7 desktop on target device
Click
OK
to continue and launch the command console window.
From the command console window, launch the
IPConfig
command to retrieve the target
device’s IP address information, as shown in Figure 46.
Fig. 46 -
Compact 7 desktop on target device
Alternatively, you can double click on the network icon on the Compact 7 device desktop’s taskbar
to bring up the network controller information screen which provides IP address information, as
shown in Figure 47.