Temperature Settings
When your iCool starts up, you are offered 3
different ways to choose a water temperature
setting. Whichever method you choose it eventually
takes you to the main run screen. If you make no
setting, the system will automatically insert 15°C.
(around 59ºF) In this case you can proceed directly
to start the pump and cooling system.
If you want to use your previous setting from
the last session, you can touch the use previous
setting button and the last setting you used will be
automatically inserted into the system. Previous
settings will be lost if you have removed to mains
power.
If you want to make a different temperature setting,
you touch the CHANGE setting button and this will
take you to the water temperature setting screen
illustrated above right, where you can use the up
and down arrows to select the temperature you
require. After you make your setting touch the start
button to go to the main screen where you can start both the pump and
the cooling system and where all relevant temperature information is
clearly displayed.
After you start the system running you can view the actual water
temperature in full screen by touching the blue POOL TEMPERATURE
square at the bottom left of the main screen for more than 2 seconds.
When your iCool starts up, the first screen you
will see offers you a system settings button. THE
BEST SETTINGS ARE AUTOMATICALLY SELECTED
so there is usually no need to use this feature. The
three settings you can change are the fan speed
range, the temperature from degrees Centigrade to
Fahrenheit and the sound level from the screen.
Cooling Fan Speed
This allows you to set the main cooling fan to either NORMAL or QUIET
MODE. Generally you should always leave it in the NORMAL mode
which is fully automatic and allows the system to control the fan speed
to give the very best efficiency and fastest cooling.
Quiet Mode
Quiet mode will greatly reduce the cooling ability of the system. If
there is a risk of overheating the safety system will turn the fan back to
high no matter what the setting. The NORMAL setting is used to give
absolute maximum cooling power and gives about 40% more cooling
than in the QUIET MODE.
Temperature Display Scale
This can be set to either Centigrade or Fahrenheit and this changes all
of the displays throughout the entire system. When you first start the
iCool it will normally start in Centigrade as this is the world standard.
Due to complex decimal calculations between Cº and Fº there may be
minor difference in the true Fº displays. This has no effect on actual
cooling accuracy.
The sound level adjusts the sounds made by touching the screen and
by the alarms. Normally it should be left on high to assist with settings
and to make sure alarms are heard.
A red dot indicates which setting is selected in each of the available
settings.
10
iCool Sport
FUNCTIONS OF THE TOUCH BUTTONS
SYSTEM SETTINGS
SYSTEM SETTINGS
MAIN SCREEN
USE PREVIOUS SETTING
MAKE NEW SETTINGS
Touch Buttons Screen
Water Temperature Setting Screen
Water Temperature Full Screen
27
°
10
°
14
°
10
°
27
°
Summary of Contents for TWIN
Page 1: ...Owners Manual iCool TWIN ...
