DISPLAY
COUNTDOWN
FULL
SCREEN
shut down automatically and the clock digits on the bottom right of
the screen will begin to flash as with setting the clock. Use the same
up down and left right arrows to set the number of hours and minutes
you wish to elapse before the system automatically shuts down.
The system automatically begins the countdown and will stop when
the amount of time you set reaches zero. The time remaining before
shutdown is displayed on the main clock display screen.
As the same arrows are used to set all three time functions, to avoid
confusion, a red dot appears next to be button of the function being set.
Recovery Session Timer Functions
A very popular and useful feature of your iCool is the session
countdown timer. This allows you to accurately control the immersion
times of athletes and to repeat those times as often as needed. This
is an essential part of successful cryo recovery therapy and is just as
important as maintaining accurate and consistent temperatures, which
of course your iCool does perfectly.
The session timer is set up from the main time setting screen by
touching the set countdown button. The numbers on the setting screen
in the bottom right-hand corner will begin to flash and you can use
the left, right and up, down arrows to change the time in minutes and
seconds. Once you have set the time you want your athletes to remain
in the bath, touching the display countdown full-screen button will take
you to the screen illustrated below. This screen allows you to see the
countdown from a distance and also to control it in various convenient
ways. The current pool temperature and the outside temperature will
also be displayed.
The count down can be set for either once only, or it can repeat
automatically as many times as you like. This is particularly convenient
if you have a number of athletes using the same pool at the same time.
The system beeps for each of the last five seconds at the end of each
countdown to warn the athletes to get ready to get either in or out of the
pool and pauses for several seconds to allow the changeover before the
countdown begins again (if it is set in the repeat mode).
Temperature Limitations
Because of the dangers of hypothermia in the case of an unattended
athlete using the pool, your system will not allow you to set temperatures
below 5°C/40°F. If the model you are using is the contrast model
which also provides heating for contrast therapy you cannot set the
temperature above 45°C/112°F because of the risk of scalding. These
temperature limits have been set after wide consultation with the
sporting industry around the world. There are no demonstrated benefits
in using water temperature lower than 5°C or above 45°C and therefore
the risk of doing so is not justified. If you really do need lower or higher
temperatures for any reason, iCool can change the software on request,
but this modification is at the owner’s risk.
Timing Functions
Your iCool offers a number of very useful timing
functions including a real-time clock, a countdown
timer to time recovery and training sessions and a
timer to shut down the system automatically at a
predetermined time after use. To set up and use
these functions touch the timer function button
on the home screen. You can reach this screen by
using the back 1 button or the home button.
You can display the time of day on the built-in clock.
To set the clock touch the set main clock button
on the timing functions screen and the time setting
display on the bottom right of the screen will begin flashing. You must
set it while one of the numbers is flashing by using the up down and
left right keys. Once you stop using these keys for more than a few
seconds the display will stop flashing and the time showing is set into
the system and the clock begins operating.
The iCool clock operates in the universal 24-hour time style.
Automatic System Shutdown Timer
BE AWARE THAT THE TWIN MUST SET BOTH SCREENS TO SHUT
DOWN COMPLETELY
You can preset your iCool TWIN to shut down
either of the 2 systems at any time up to five hours
in the future. This is very convenient for coaches
and specialists who may want to leave the training
area early but want to make sure that the system is
not left running needlessly. To set this time, touch
the set shut down button on the side you want to
11
Owner’s manual for iCool Recovery Systems
TIMER FUNCTIONS
SET COUNT DOWN
DISPLAY COUNTDOWN
TIMER FUNCTIONS
DOWN
UP
RIGHT
LEFT
SET SHUT DOWN
SET MAIN CLOCK
Time Setting Screen
11:25
Summary of Contents for TWIN
Page 1: ...Owners Manual iCool TWIN ...
