iCool TWIN Owner'S Manual Download Page 11

As you can see, iCool Systems have attractive user interfaces, this makes them easy and very intuitive to use, but the downside 
is that untrained people sometimes like to play with the colourful touch-screens. As with any sophisticated piece of equipment 
when people start pressing buttons at random anything can happen.  We have covered this by installing a secret locking routine. 

It is a good idea to keep this a secret that is known only to as few people as possible.

To lock the screen so that no further inputs can be made, touch and hold the iCool icon on the main run screen for more than 10 seconds (you can 
only lock from this main screen). A picture of a lock will appear. While ever this lock is visible it is not possible to make any inputs or to change screens.

To unlock the system and returned to normal, repeat the procedure. Touch and hold the iCool icon for more than 10 seconds. The lock will disappear 
and all functions will return to normal.

12

iCool Sport

LOCKING YOUR ICOOL SYSTEM

YOUR ICOOL HAS AN ELECTRIC LOCK

TROUBLESHOOTING

IF YOUR SCREEN FREEZES OR FAILS TO RESPOND

As with all computers and computer controlled devices it is possible that occasionally the system could freeze due to data or software conflicts. 
Your iCool has 2 computers that monitor and communicate with each other. Occasionally a data error can cause them to stop communicating. 

We have designed the system to be as fail safe as possible. In most cases if the screen freezes the main computer will still carry on running the 
system and monitoring the safety features but you will not be able to change anything. You can either allow it to keep running if that is more 
convenient, or you can restore the system to normal operation by switching off the main power and re starting, exactly as you would do if your 
computer or smart phone freezes.

Time Remaining Screen

Current Time Screen

PAUSE

START

DISPLAY CLOCK

RESET

REPEAT

You can pause the countdown at any time and 
start again from the same position with this 
button, or touch reset to start from the top

This button starts the countdown

You can also display the main clock, showing 
the time of day in full-screen mode if required 
by touching the display clock full screen button.

To go back to the previous screen touch the 
back 1 button

Resets time to preset value in the 

single shot mode, ready to start again 

by pressing the start button

When this button is pressed the countdown 

will repeat until the repeat function is 

cancelled by pressing once again. A red dot 

indicates that it is active

DISPLAY 

CLOCK

FULL

SCREEN

14:10

2:10

14

°

14

°

2:41

27

°

Summary of Contents for TWIN















Reviews: