background image

Introduction

Please write your serial number here for future reference:

Purchased at:

Date of purchase:

Thank you for purchasing the ICON iCreativ USB MIDI  controller. We sincerely trust this 

product will provide years of satisfactory service, but if anything is not to your complete 

satisfaction, we will endeavor to make things right. 

In these pages, you'll find a detailed description of the features of the iCreativ, as well as 

a guided tour through its front and side panels, step-by-step instructions for its setup and 

use, and full specifications. 

You'll also find a warranty card enclosed---please don't forget to fill it out and mail it so 

that you can receive online technical support at: www.icon-global.com. And so we can 

send you updated information about these and other ICON products in the future. As 

with most electronic devices, we strongly recommend you retain the original packaging. 

In the unlikely event the product must be returned for servicing, the original packaging 

(or reasonable equivalent) is required.

With proper care and adequate air circulation, your iCreativ will operate without any 

trouble for many years. We recommend that you record your serial number in the space 

provided below for future reference.

What's in the package?

iCreativ USB MIDI controller  x 1
Software CD x 1
Quick Start Guide
USB2.0 Cable

Quick Start Guide

USB2.0 Cable

Software CD

iCreativ

Summary of Contents for i-creativ





















Reviews: