Master/Slave selector
“Save file” button
“Load file” button
“Send Data” button
“MIDI Devices” button
“Firmware Upgrade” button
Mode select buttons
Select “Master” if you use it as a standalone device and select “Slave” if
you are cascading it as a salve unit with another ICON i-series controller.
Click this button to save your current settings for the iCreativ. The file is an
“.iCreativ” file.
Click this button to load a previously saved “.
” setting file for your iCreativ.
Click this button to upload the iMap software settings to your iCreativ via
USB connection.
Click this button, a MIDI device select window
will appear as shown in diagram1. Please select
“ICON iCreativ” for the MIDI Out Devices.
Click this button to enter into the firmware upgrade window for iCreativ.
Please refer to P.13 for the firmware upgrade procedure.
Press the corresponding button to select the mode for the preferred settings.
iCreativ
TM
(Note: You must have connected your iCreativ to your Mac/PC, otherwise the
settings upload will not be successful.)
Diagram 1
iCON iCreativ
