Control buttons
1.Piano mode:
2.Pad mode:
3.Control mode:
4.X/Y mode:
5.Clip mode:
6.Arpeggio mode:
3D effector
effect selector and Arpeggio tempo knob
Effect selector
Arpeggio tempo knob
3-digi LED
Knobs
Fader
Dependant on the mode selected, these buttons activate the following
functions:
Octave shift, button 5 represents unshifted octave
Shifting between 2 layers
Shifting between 2 layers
Shifting between 8 layers of X/Y pads
Shifting between 2 layers of clip buttons
Selects the 8 groups of pre-stored arpeggio sequence.
Wave your palm above the
(no more than 9cm away) to
create an effect. The
software allows the CC value for the 10
effects (layers) of the
to be set
Rotate the knob to switch between the 10 effectors (layers).
Press down the knob, the red light will illuminate. Rotate the knob
to adjust the tempo from 40-300 for your arpeggio.
Shows the information of a particular control
These four programmable encoder knobs allow MIDI parameters to be
adjust. Set their midi message via
software
Programmable fader slide to adjust linear MIDI parameters such as
volume or change the midi message with
software.
(Note: Arpeggio mode must be enabled)
AirLight
AirLight
AirLight
TM
TM
TM
AirLight
TM
iMap
AirLight
iMap
iMap
TM
TM
TM
TM
Note: As
is an infra-red device, its performance will affect by
sunlight or spot lights. Try to avoid light that affects its performance
.
AirLight
TM
