Step 3:
Step 4:
Step 5:
Step 6:
Press the “MIDI Device” button at the top to select your connected
ICON product as the “MIDI In and Out” device at the pull-down menu.
Click the “Open File” button to browse the new firmware file.
Click the “Upload” button to upload the firmware.
Touch screen calibration - Use a pen to point to the centre of the
square that appears on iCreativ. After the calibration has been completed
on the first square, the second square will appear automatically. Calibrate in
the same way as the first square. Repeat the process until all 5 squares have
been calibrated.
Warning:The firmware upload process
“
MUST
”
be completed and not be interrupted
during the file uploading, otherwise the firmware may not be rewritten again.
Firmware upgrade
Step 1:
Step 2:
Connect the ICON product using a USB connection. Press the “MIDI
Device” button at the top to select your connected ICON product as the
“MIDI In and Out” device at the pull-down menu.
Click the “Update” button.
Note: If your connected ICON product model name does not appear on the
pull-down menu, select
“
USB Audio
”
as the MIDI In and Out device.
Diagram 2
Diagram 1
