BIA-DPC3 rev 5
Page 42
The pump has run for 23 hours.
Press the
A STOP
key to quit the accumulative running time display.
Repeat for pump B by using
B STOP
key.
8.8 Pump disable
To disable a pump independently, in
AUTO
mode press
MODE
and
A STOP
or
B STOP
at the same time for 2 seconds. A PUMP
and MANUAL flashing means pump A is disabled.
To restore the pump, in
AUTO
mode press
MODE
and
A START
or
B START
at the same time for 2 seconds.
9.0 Communication link.
The control panel has communication interface, that along with the optional Slave Controller, users can realise a long distance
monitoring function.
This function applies to where the control panel is installed in the basement or pumping room, but users require to monitor and
control the pump on the ground or in a control room.
