BIA-DPC3 rev 5
Page 19
2.2
Connections for pump over temperature protection (where supplied with pump).
Note:
to realize the pump motor winding over temperature protection, it requires that there must be over-temperature
switches embedded in the pump motor winding (microtherms as fitted to Zenit 3ph pumps 2.2 kW or greater). To utilise the
pump’s over temperature protection connect the pump’s microtherm leads to terminals 9 and 11, 10 and 12 and remove the
jumper.
Note:
if the pump is without over temperature switch, please use jumper to connect terminals 9 and 11, 10 and 12.
2.4 Installing float switches and probes.
Float switch installation.
Do not encase sensor leads, float switches or signal cables in metal pipes. Use PVC or PE tubing.
Liquid probe installation.
Jumper Leads