![background image](http://html1.mh-extra.com/html/icom/ip730d/ip730d_instruction-manual_2038206030.webp)
5
OTHER FUNCTIONS
5-9
Using the Voice Recorder function
The transceiver can record and playback up to 10 of the latest
incoming calls,
depending on a presetting�
L
Records up to 4 minutes per call� If a call is longer than 4 minutes, the older will be
automatically deleted�
L
Therecordablecalltypemaydiffer,dependingonapresetting.
L
A recorded audio data cannot be exported�
L
This function does not record analog audio�
D
Using the Voice Recorder function
1. Enable the Voice Recorder function
1� Turn OFF the transceiver, if it is turned ON�
2� While holding down [FUNC], rotate [VOL] to turn ON the transceiver�
•The Set Mode is displayed�
L
Releasefingerfrom[FUNC]when“SETMODE”isdisplayed.
3�
RotateRotarySelectororpush[▲]or[▼]toselectanitemgroup“Common,”and
then push [FUNC]�
4� Push [FUNC] or [Address] several times to select “Recording�”
5�
RotateRotarySelectororpush[▲]or[▼]toselect“ON.”
6� Push [CLR/Lock] to exit “Recording�”
L
Push [CLR/Lock] again to exit the Set mode and return to the Standby screen�
2. Turning ON the Voice Recorder function
1� Push [FUNC] to display the Function�
•The Function screen is displayed�
2� Push [FUNC] to display “Recording,” if another function is displayed�
L
You may need to push [FUNC] several times, depending on a presetting�
3�
RotateRotarySelectororpush[▲]or[▼]toselect“ON.”
4� Push [CLR/Lock] to return to the Standby screen�
• “
” is displayed�
3. Playing back the recorded audio
“ ” blinks in the Standby Screen if there is recorded audio that has not been played back�
1� Push [Call History] to display the Function�
•The Call History is displayed�
2� Push [Call History] several times to toggle the Call history from “Tx log,” “Rx log,”
“TX MSG log,” “RX MSG log,” or “Recording Log�”
L
Displayedlogmaydiffer,dependingonapresetting.
3�
Push[▲]or[▼]toselectaaudiotoplayback.
4� Hold down [Call History] for 1 second to playback the audio�
L
Push[▲]or[▼]tostopplayingbacktheaudio.
SET
Recording
ON
D
Deleting the recorded audio
1� Turn OFF the transceiver, if it is turned ON�
2� While holding down [FUNC], rotate [VOL] to turn ON the transceiver�
•The Set Mode is displayed�
L
Releasefingerfrom[FUNC]when“SETMODE”isdisplayed.
3�
RotateRotarySelectororpush[▲]or[▼]toselectanitemgroup“Common,”and
then push [FUNC]�
4� Push [FUNC] or [Address] several times to select “Delete Recording�”
5�
RotateRotarySelectororpush[▲]or[▼]toselect“Clear.”
6� Push [Call History] to delete the recorded audio�
7� Push [CLR/Lock] to exit “Delete Recording�”
L
Push [CLR/Lock] again to exit the Set mode and return to the Standby screen�
SET
Delete Recording
Clear
Txlog→Rxlog→TxMSGlog→RxMSGlog→TxCalllog→RxCalllog→Recordinglog