![background image](http://html1.mh-extra.com/html/icom/ip730d/ip730d_instruction-manual_2038206048.webp)
7
FOR YOUR REFERENCE
7-7
1� Open the battery case�
2� Push the tab (
1
), and then remove the battery
holder (
2
)�
3� Install batteries in the holder�
Options (Continued)
D
Using the BP-305 battery case
Install 5 × AA (LR6) size alkaline batteries, as shown below�
4� Insert the battery holder to the battery case until
the tab makes a ‘click’ sound�
5� Firmly close the battery case�
L
Make sure that the waterproof packing does not stick
out of the case�
Tab
1
2
1
2
1
2
WARNING: NEVER
use batteries other than
alkaline batteries, such as manganese batteries or
rechargeable batteries� It may cause rupture, ignition,
fire, heat generation, liquid leakage, electric shock,
and burns�
CAUTION:
•
DO NOT
incinerate used battery cells since internal
battery gas may cause them to rupture�
•
DO NOT
expose a detached battery case to water� If the
battery case gets wet, be sure to wipe it dry before using it�
•
DO NOT
use batteries whose insulated cover is damaged�
NOTE:
•
When installing the batteries, make sure they are all the
same brand, type and capacity� Also, do not mix new and
old batteries together�
•
Keep the battery terminals clean� It’s a good idea to
occasionally clean them�
•
Remove alkaline batteries when the battery case is not
used�
•
The transceiver turns OFF when the battery case voltage
falls below the operating range of the transceiver�
•
The transmission output power in the IDAS mode will be
reduced to low power when using the battery case and
alkaline batteries�