![background image](http://html1.mh-extra.com/html/icom/ip730d/ip730d_instruction-manual_2038206009.webp)
2
BEFORE USING
2-4
Basic operation
D
Turning ON the transceiver
NOTE:
Before using the transceiver for the first time, the battery pack must be fully
charged for optimum life and operation� See the BATTERY CHARGING section on
the boxed INSTRUCTIONS�
z
Rotate [VOL] clockwise to the 12 o’clock position to turn ON the transceiver�
L
The dial is made tight for dust and water resistance�
L
To turn OFF the transceiver, rotate [VOL] counter-clockwise until it makes a “click” sound�
L
An opening text may be displayed, depending on a presetting�
D
Adjusting the volume level
z
Rotate [VOL] to adjust the volume level�
L
The Adjustment screen is displayed while adjusting�
D
Using the Key Lock function
You can use the Key Lock function to prevent accidental channel changes and
unnecessary function access, depending on a presetting�
Functions except the following are electronically locked:
[PTT], [Sub PTT], [VOL], [Emer], and the Monitor function�
z
Hold down [CLR/Lock] for 1 second to turn the Key Lock function ON or OFF�
L
“ ” is displayed while the function is ON�
D
Selecting the operation mode
You can select the operating mode, as shown below� See the section or page shown
below for instructions on each operation mode�
Cellular mode: Section 3
IDAS mode: Section 4
Dual mode: p. 5-11
NOTE: About the Repeater (Bridge) mode:
The Repeater Mode relays received IDAS audio to the cellular transceiver
group, while transferring the cellular radio conversations to the IDAS transceiver
group� Ask your dealer about the mode details�
1� Push [FUNC] to display the function�
•The Function screen is displayed�
2� Push [FUNC] to display “Mode Select,” if another function is displayed�
L
You may need to push [FUNC] several times, depending on a presetting�
3�
Push [▲] or [▼] to select the operating mode, and then push [Call History].
•The operating mode is selected and then returns to the Standby screen�