![background image](http://html2.mh-extra.com/html/icom/id-52a/id-52a_reference-manual_3777547006.webp)
5
REMOTE CONTROL
Remote control (CI-V) information
D
Command table
Command Sub
Data
Description
16*
42
00/01
Send/read the Repeater tone
(00=OFF, 01=ON)
43
00 ~ 02
Send/read the Tone squelch
(00=OFF, 01=TSQL, 02=TSQL-R)
46
00/01
Send/read the VOX function
(00=OFF, 01=ON)
4B
00 ~ 02
Send/read the DTCS function
(00=OFF, 01=DTCS, 02=DTCS-R)
59
00
Send/read SUB band OFF
01
Send/read SUB band ON
5B
00 ~ 02
Send/read the DSQL (Digital Call
Sign squelch)/CSQL (Digital Code
squelch) setting
(DV mode only)
(00=OFF, 01=DSQL, 02=CSQL)
5C
00 ~ 02
Send/read the GPS TX mode
(00=OFF, 01=D-PRS, 02=NMEA)
5D
00 ~ 09
Send/read the Tone squelch function
( 00=OFF, 01=TONE, 02=TSQL,
03=DTCS, 04=TSQL-R,
05=DTCS-R, 06=DTCS (T),
07=TONE (T)/DTCS (R),
08=DTCS (T)/TSQL (R),
09=TONE (T)/TSQL (R))
18
00
Turn OFF the transceiver
01*
2
Turn ON the transceiver
19
00
Read the transceiver ID
1B*
00
Send/read the Repeater tone
frequency
01
Send/read the TSQL tone frequency
02
Send/read the DTCS code and polarity
07
Send/read the CSQL code (DV mode)
1C*
00
00/01
Send/read the transceiver’s status
(00=RX, 01=TX)
1F*
00
Send/read the My Call Sign setting
01
Send/read the DV TX Callsign setting
02
Send/read the DV TX Message setting
20
00
00*
00/01*
3
Send/read the Auto DV RX Call signs
output
(00=OFF, 01=ON)
01
Output DV RX Call signs for transceive
02
Read Auto DV RX Call signs
01
00*
00/01*
3
Send/read the Auto DV RX message
output
(00=OFF, 01=ON)
01
Output DV RX message for transceive
02
Read Auto DV RX message
02
00*
00/01*
3
Send/read the Auto DV RX status
output
(00=OFF, 01=ON)
01
Output DV RX status for transceive
02
Read Auto DV RX status
Command Sub
Data
Description
20
03
00*
00/01
Send/read the Auto DV RX
GPS/D-PRS data output
(00=OFF, 01=ON)
01
Output DV RX GPS/D-PRS data for
transceive
02
Read DV RX GPS/D-PRS data for
transceive
04
00*
00/01
Send/read Auto DV RX GPS/D-PRS
message output
(00=OFF, 01=ON)
01
See p� 12 Output DV RX D-PRS message for
transceive
02
See p� 12 Read Auto DV RX D-PRS message
status
22
00
See p� 12 Set the DV TX data (Up to 30 byte)
01
00
00/01
Set the Auto DV RX data output
(00=OFF, 01=ON)
01
See p� 12 Set the DV RX data for transceive (Up
to 30 byte)
02*
00/01
Send/read DV data TX setting
(00=PTT, 01=Auto)
03*
00/01
Send/read DV fast data setting
(00=OFF, 01=ON)
04*
00/01
Send/read GPS Data Speed setting
(00=Slow, 01=Fast)
05*
00 ~ 10
Send/read TX Delay (PTT) setting
(00=OFF, 01=1 sec� ~ 10=10 sec�)
23
00
See p� 12 Read the position status
01*
00/01/03 Send/read the internal GPS OFF
( 00=OFF, 01=Internal GPS,
03=Manual)
02*
See p� 12 Send/read the manually input position
data
24
00
00*
00/01
Send/read TX output power setting
(00=OFF, 01=ON)
01
00/01
Set the TX output power for transceive
(00=OFF, 01=ON)
*(Asterisk) Send/read data
*
1
Less than 100 Hz is omitted�
*
2
When sending the power ON command (18 01) using the [SP] jack
(p� 3), the command “FE” must be sent before the basic format�
The following is the approximate number of needed repetitions�
•4800bps: 15 “FE”s
•9600bps: 30 “FE”s
•19200bps: 60 “FE”s
q
w
e
r
t
u
Example: When operating with 4800 bps
×15
F
6
A
E
F
E
F E
E
1
0
8
1
0
D
F
1
Preamble code (fixed)
2
Transceiver’s default address
3
Controller’s default address
4
Command number
5
Sub command number
7
End of message code (fixed)
*
3
Output setting is automatically set to OFF after turning OFF the
transceiver�