![background image](http://html2.mh-extra.com/html/icom/id-52a/id-52a_reference-manual_3777547005.webp)
4
REMOTE CONTROL
Remote control (CI-V) information
D
Data format
The CI-V system can be written using the following data formats� Data formats differ according to
command numbers� A data area or sub command is added for some commands�
D
Command table
Command Sub
Data
Description
00
Send operating frequency for
transceive
01
Send operating mode for transceive
03
Read operating frequency
04
Read operating mode
05
Send operating frequency
06
Send operating mode
07
Select the VFO mode
D0
Select the A band
Dualwatch: Set the MAIN band as
the A band
Single watch: Select the A band
D1
Select the B band
Dualwatch: Set the MAIN band as
the B band
Single watch: Select the B band
0C
Read offset frequency*
1
0D
Set offset frequency
0F
Read duplex setting
(10=OFF, 11=DUP–, 12=DUP+)
10
Set Simplex
11
Set Duplex –
12
Set
Command Sub
Data
Description
11*
00/10/30 Send/read Attenuator
( 00=OFF, 10=10 dB (375
~
479 MHz),
30=30 dB (108
~
374�995 MHz)
14*
01
Send/read the audio level
03
Send/read the squelch level
0A
Send/read the RF power setting
0B
Send/read MIC gain (External)
16
Send/read the VOX gain
15
01
00/01
Read noise or S-meter squelch status
(00=Close, 01=Open)
02 0000 ~ 0255 Read S-meter level
(0000=S0, 0170=S9)
05
00/01
Read various squelch function’s
(including the tone squelch) status
(00=Close, 01=Open)
11 0000 ~ 0255 Read the Po Meter Level
( 25=S-Low, 76=Low1,
128=Low2, 179= Mid, 230=High)
Controller to ID-52A/E
OK message to controller
NG message to controller
ID-52A/E to controller
FE FE A6
E0
Cn
Sc
Data area
FD
Preamble code
(fixed)
Transceiver
’s
default address
Controller
’s
default address
Command number
(see the command table)
Sub command number
(see the command table)
BCD code data for frequency or memory
number entry
End of message
code
(fixed)
FE FE E0
A6
FB
FD
FE FE E0
A6
FA
FD
Preamble code
(fixed)
Controller
’s
default address
Transceiver
’s
default address
OK code
(fixed)
End of message
code
(fixed)
NG code
(fixed)
q
w
e
r
t
y
u
FE FE E0
A6
Cn
Sc
Data area
FD
q
w
e
r
t
y
u
*(Asterisk) Send/read data