![background image](http://html1.mh-extra.com/html/icom/id-50a/id-50a_basic-manual_4733641018.webp)
5
BASIC MANUAL
1
2
2
1
1
2
INITIAL SETUP
Before starting using the transceiver, follow these steps for the initial setup.
STEP 1
Attaching the battery pack and charging the battery. (pp. 5, 6)
STEP 2
Inserting a microSD card. (p. 7)
STEP 3
Turning ON the transceiver. (p. 7)
STEP 4
Adjusting the audio level. (p. 7)
STEP 5
Saving your initial setting onto a microSD card. (p. 8)
STEP 6
Confirming the GPS signal receiving. (p. 10)
STEP 7
* Entering your Call sign (MY) into the transceiver. (p. 43)
STEP 8
* Registering your call sign at a Gateway repeater. (p. 45)
► You have completed the steps!!
* You can skip the steps if you do not plan to operate D-STAR right now.
■
Attaching the Battery pack
Attach or detach the battery pack or battery case, as illustrated below.
L
When attaching, slide the battery pack and hold it down until both latches are locked.
Battery pack or
battery case
NOTE:
•
Even when the transceiver is OFF, a slight current still flows in the circuits. Remove the
battery pack or case from the transceiver when not using it for a long time. Otherwise,
the attached battery pack or case will become exhausted, and need to be recharged or
replaced.
•
When the temperature is around 0°C (32°F) or below, the Battery Protection function
automatically sets the transceiver power to Low1 power (0.5 W), and disables power
selections High, Mid, and Low2.
To attach
To detach
Summary of Contents for ID-50A
Page 50: ......
Page 51: ...D STAR GUIDE for the ID 50A ID 50E...
Page 86: ...MEMO...
Page 87: ...MEMO 1 7 4 10 15 18 2 8 13 5 11 16 3 9 14 6 12 17...