![background image](http://html1.mh-extra.com/html/icom/id-50a/id-50a_basic-manual_4733641075.webp)
D-STAR OPERATION
62
D-ST
AR GUIDE
1
7
4
10
15
18
2
8
13
5
11
16
3
9
14
6
12
17
■
“
TO” (Destination) setting
By rotating [DIAL]:
Select a repeater or Your Call Sign that
is displayed by rotating [DIAL] on the
DR screen. (This operation is disabled
when “CQCQCQ” is set.)
TIP:
After you receive the individual
station or repeater’s signal, the call sign
can be captured by holding down the
Call Sign Capture key ([RX→CS]), and
you can quickly and easily reply to a
call.
To make a Local Area CQ call:
Set “CQCQCQ” in “TO” (Destination).
To make a call to a specific station:
Select the station call sign in the Your
Call Sign.
To select from RX History:
When you receive a call, the caller
station data is saved in RX History.
You can select the destination from the
record.
To directly enter the destination
station call sign:
Directly enter the destination station’s
call sign.
To make a Gateway CQ call:
Select a repeater from the repeater list,
if you want to make a Gateway call.
To make a call through a reflector:
Select a reflector that is connected to
the repeater you want to call through.
To select from TX History:
When you make a call, the destination
repeater or called station data is saved
in TX History. You can select the
destination from the record.
To directly enter the destination
repeater call sign:
Directly enter the destination repeater’s
call sign.
Summary of Contents for ID-50A
Page 50: ......
Page 51: ...D STAR GUIDE for the ID 50A ID 50E...
Page 86: ...MEMO...
Page 87: ...MEMO 1 7 4 10 15 18 2 8 13 5 11 16 3 9 14 6 12 17...