INITIAL SETUP
2
6
1
7
4
10
15
18
2
8
13
5
11
16
3
9
14
6
12
17
BASIC MANUAL
■
Charging the battery pack
D
Capacity of the battery pack
ICON
BATTERY STATUS
The battery has sufficient capacity.
The battery is exhausted a little.
The battery is nearing exhaustion.
The battery is almost fully exhausted.
To display the correct battery status:
Select the attached battery pack in the following item. (Default: BP-271/BP-272)
([MENU] > SET > Function >
Battery Pack Select
)
To display the Battery Pack Select dialog every time you attach the battery pack, set the
following item to “ON.”
([MENU] > SET > Function >
Battery Pack Confirmation
)
NOTE:
•
Before using the transceiver for the first time, the battery pack must be fully charged for
optimum life and operation.
•
BE SURE
to turn OFF the transceiver while charging. Otherwise, the attached battery pack
cannot be charged.
•While charging, the charging icon “
” and “Charging....” are displayed.
•The icon and “Charging....” disappear when the battery pack is fully charged.
•You may not be able to charge:
- Depending on your USB cable or power adapter.
- When using a USB hub or connecting to a low output USB port.
•
Charging time may differ, depending on the USB port.
•
To use a mobile device or a PC as an external power source, set the following item to “ON”
(default).
[MENU] > SET > Function >
USB Power Input (Phone, Tablet, PC)
USB cable
To a
USB port
Power adapter
or external battery
(User supplied)
Turn OFF
L
See the Advanced manual about the optional battery packs and chargers.
Summary of Contents for ID-50A
Page 50: ......
Page 51: ...D STAR GUIDE for the ID 50A ID 50E...
Page 86: ...MEMO...
Page 87: ...MEMO 1 7 4 10 15 18 2 8 13 5 11 16 3 9 14 6 12 17...
