![background image](http://html2.mh-extra.com/html/icom/ic-w32a/ic-w32a_instruction-manual_4733620034.webp)
■
Scan resume condition
The resume condition can be selected as a pause or timer
scan for each band (VHF VFO and memory channels, UHF
VFO and memory channels, avionics* band).
■
Skip channel setting
Memory channels can be set to be skipped for memory skip
scan. This is useful to speedup the memory skip scan inter-
val.
q
Select the memory channel to be programmed as a skip
channel:
➥
Push [MAIN] to select the desired band.
➥
Push [MR] to select memory mode.
➥
Rotate [DIAL] or push 2 digit keys to select the memory
channel.
w
Push [
(MR)
SKIP] for 2 sec. to set the memory channel as a
skip channel.
• “
” appears.
e
Repeat step
w
to cancel a skip channel.
• “
” disappears.
S
S
8
SCAN OPERATION
30
Indicates the channel is set
as a skip channel.
MAIN
MAIN
S
Push for
2 sec.
MR
SKIP
q
Turn power ON while pushing [
(MAIN)
SCAN] to enter
scan set mode.
w
Push [
(H/L)
J
] or [
(TONE)
K
] several times to select the de-
sired band to be set.
• Avionics*/144/430(440) VFO, VHF/UHF memories are available.
e
Rotate [DIAL] to select the desired resume condition.
• “t-15”: scan pauses for 15 sec. on a received signal.
• “t-10”: scan pauses for 10 sec. on a received signal.
• “t-05”: scan pauses for 5 sec. on a received signal.
• “P-02”: scan pauses on a received signal until it disappears.
r
Turn power OFF to exit scan set mode.
USING
Scan set mode
15 sec. timer for resume
condition
Pauses until the signal
disappears
* U.S.A. and Asia versions only.
SETTING THE SCAN RESUME CONDITION
(Following displays show the 144 MHz band full/programmed scan)