![background image](http://html2.mh-extra.com/html/icom/ic-w32a/ic-w32a_instruction-manual_4733620027.webp)
■
Programming after selection
q
Assign the main band to the desired display with [MAIN].
w
Select the memory channel to be programmed.
➥
Push [MR] to select memory mode.
➥
Rotate [DIAL] or push 2 digit keys to select the memory
channel (only programmed memories can be selected).
e
Set the desired frequency in VFO mode:
➥
Push [VFO] to select VFO mode.
➥
Set the desired frequency using the keypad or [DIAL].
➥
Set other data (e.g. offset frequency, duplex direction,
subaudible tone frequency, etc.), if required.
r
Push [
(S.MW)
MW] for 2 sec. to program.
• If beep tones are turned ON, 3 beeps alert you that the VFO con-
tents, including duplex information, subaudible tone frequency,
etc., are programmed.
NOTE: Call channels cannot be programmed in this way.
6
MEMORY/CALL PROGRAMMING
23
■
Memory edit
(transferring)
Memory (call) channel contents can be moved to VFO or to
another memory.
D
Memory/call
➾
VFO
q
Assign the main band to the desired display with [MAIN].
w
Select the memory (call) channel to be transferred:
➥
Push [MR] (or [CALL]) to select memory (call) mode.
➥
Rotate [DIAL] or push 2 digit keys to select the memory
channel (only programmed memories can be selected).
e
Push [
(S.MW)
MW] for 2 sec. to transfer.
• The contents are transferred and VFO mode is selected.
D
Memory/call
➾
memory/call
q
Assign the main band to the desired display with [MAIN].
w
Select the memory (call) channel to be transferred:
➥
Push [MR] (or [CALL]) to select memory (call) mode.
➥
Rotate [DIAL] or push 2 digit keys to select the memory
channel (only programmed memories can be selected).
e
Push [
(S.MW)
MW] momentarily.
• “VFO” appears in the display.
r
Rotate [DIAL] to select a memory or call channel to trans-
fer the data.
t
Push [
(S.MW)
MW] for 2 sec. to transfer.
• The contents are transferred and the original channel is selected.
MAIN
T SQL
DUP
MAIN
for 2 sec.
S.MW