7
DTMF MEMORY
27
■
DTMF transmission speed
When slow DTMF transmission speeds are required (as for
some repeaters), the transceiver’s rate of DTMF transmission
can be adjusted.
■
Transmitting a DTMF code
D
Using a DTMF memory channel
q
Push [
(•)
DTMF•M] for 2 sec. to enter DTMF memory mode.
w
Rotate either band’s [DIAL] to select the desired channel.
e
Push [
(VFO)
CLR] again to exit DTMF memory mode.
r
While pushing [PTT], push [
(MAIN)(SCAN)
DTMF] to transmit
the selected DTMF code.
NOTE: Push [
(MAIN)(SCAN)
DTMF] while in DTMF memory
mode to monitor a DTMF channel without transmitting it.
SETTING THE DTMF TRANSMISSION SPEED
q
Turn power ON while pushing [
(H/L)
SET] to enter initial
set mode.
w
Push [
(H/L)(SET)
J
] or [
(TONE)
K
] several times until “DT”
appears as shown above.
e
Rotate [DIAL] to select the DTMF transmission speed.
r
Turn power OFF to exit initial set mode.
USING
Initial set mode
Fastest (100 msec.
intervals)
Slowest (500 msec.
intervals)
