![background image](http://html2.mh-extra.com/html/icom/ic-w32a/ic-w32a_instruction-manual_4733620030.webp)
DTMF MEMORY
7
26
■
Programming a DTMF code
The transceiver has 4 DTMF memory channels (d1 to d4) for
storage of often-used DTMF codes of up to 16 digits. The
memory channels are for common use on both bands.
q
Push [
(•)
DTMF•M] for 2 sec. to enter DTMF memory mode.
w
Rotate either band’s [DIAL] to select the desired channel.
e
Push [
(•)
DTMF•M] for 2 sec. to enter DTMF programming
mode.
• “--- --” appears.
• Programmed DTMF code is cleared in this way.
r
Push digit keys to enter the desired DTMF code.
• The S/RF indicator shows the digit group. The indication in-
creases from no indication, 3 digits and 7 digits.
• If a pause time (2 sec.) is required in the DTMF code, push
[CALL] to input a pause code.
t
Push [
(VFO)
CLR] to store them.
y
Program DTMF memory name in a similar manner to
memory channel names, if desired.
➥
Push [
(M•N)
MN•W] for 2 sec. to enter name writing mode.
➥
Enter the desired name via the keypad or [DIAL].
• To erase a character, overwrite with a “space” using the
[
(0)
Symbol] key.
• To move the cursor forwards or backwards, use the [
(M•N)
≈]
or
[
(#)
Ω
] key.
➥
Push [
(VFO)
CLR] to input the set name.
u
Push [
(VFO)
CLR] to exit DTMF memory mode.
[EXAMPLE]: Programming “21ABC3” into DTMF memory “d3.”
•
DTMF•M
2
1
1
1
1
1
1
A
B
C
3
MAIN
for 2 sec.
for 2 sec.
VFO
VFO
•
DTMF•M