![background image](http://html1.mh-extra.com/html/icom/ic-v8/ic-v8_instruction-manual_2038138027.webp)
44
10
PAGER/CODE SQUELCH
D
Waiting for call from a specific station
q
Set the operating frequency.
w
Push [
✱
•
OPTION
] after [A•
FUNC
] is pushed.
• 100 MHz digit shows “P.”
e
Wait for a call.
• When receiving a call, the caller’s ID or group code appears as
shown below.
• DO NOT push any digit keys while code channels C0 to C6 are dis-
played, or code channel contents are changed.
r
Push [PTT] to send an answer back call and display the operat-
ing frequency.
t
After confirming a connection push [
✱
•
OPTION
] after [A•
FUNC
] is
pushed to select code squelch operation, or repeat previous key
operation again to select non-selective calling system.
• PERSONS CALLS
This display appears when you are called
with your ID code and the calling station’s ID
code is 123.
• GROUP CALLS
This display appears when you are called
with the group code, 888, and 888 has been
programmed into code channel C6.
• ERROR INFORMATION
When the transceiver receives an incomplete
signal, “E” and previously received code ap-
pear.
SKIP
MR
F
TX
CP and flash.
MR
F
TX
Code channel
MR
F
TX
Previously received
code.
43
10
PAGER/CODE SQUELCH
‘
‘
Pager operation
D
Calling a specific station
q
Program the needed code channel in advance (p. 41).
w
Set the operating frequency.
• Set the AF and squelch to the desired level as the normal operation.
e
Push [
✱
•
OPTION
] after [A•
FUNC
] is pushed.
• Pager mode is selected.
• 100 MHz digit shows “P.”
r
Select the desired transmit code channel:
➥
Push [8•
SET
] after [A•
FUNC
] is pushed.
➥
Rotate [VOL] to select the desired code channel.
➥
Push [#•
ENT
] to return to previous condition.
t
Push [PTT] to transmit the pager code.
y
Wait for an answer back.
• When the transceiver receives an answer back code, the function
display shows the other member’s ID or group code.
u
After confirming a connection push [
✱
•
OPTION
] after [A•
FUNC
] is
pushed to select code squelch operation, or repeat previous key
operation again to select non-selective calling system.
• DO NOT push any digit keys while code channels C0 to C6 are dis-
played, or code channel contents are changed.
i
Communicate with the other party as normal: push [PTT] to
transmit; release to receive.
Optional UT-108 required
MR
F
TX