![background image](http://html1.mh-extra.com/html/icom/ic-v8/ic-v8_instruction-manual_2038138018.webp)
25
6
MEMORY PROGRAMMING
26
6
MEMORY PROGRAMMING
■
Channel name programming
q
Select a channel name indication type in
INITIAL SET MODE
(pgs. 20, 51).
w
Push [C•
MR
] to select memory mode, if necessary.
e
Push [8•
SET
] after pushing [A•
FUNC
] to enter to channel name
programming mode.
• A currently editing character is flashed.
t
Rotate [VOL] to select a character.
y
Push [
Y
] to move to the right, [
Z
] to move to the left.
• Up to 5-digit channel names can be programmed.
• Usable character are; A–Z, 0–9, ”space“, +, –, =,
✱
, /, [, and ].
u
Push [#•
ENT
] to fix and exit channel name programming
mode.
■
Memory transferring
Memory (call) channel contents can be transfer to VFO or to an-
other memory channel.
D
Memory/call
➾
VFO
q
Select the memory (call) channel to be transferred:
Push [C•
MR
] ([B•
CALL
]) to select memory (call) mode.
Push [
Y
]/[
Z
] to select the memory channel.
• When “dial” is assigned [VOL], rotate [VOL] to select the memory
channel. (p. 51)
w
Push [C•
MR
] for 1 sec. after pushing [A•
FUNC
] to transfer the se-
lected memory contents to the VFO.
• VFO mode is selected automatically.
■
General
The transceiver has 100 memory channels (plus 3 pairs of scan
edges and 1 call channels) for storage of often-used frequencies.
D
Memory channel contents
The following information can be programmed into memory:
• Operating frequency
• Duplex direction (+ or –) with an offset frequency (pgs. 21, 22)
• Subaudible tone encoder or tone squelch ON/OFF (pgs. 21, 35)
• Subaudible tone and tone squelch frequencies (pgs. 22, 36)
• Skip information* (p. 32)
*Except for scan edge channels.
■
Programming the memory/call
channels
q
Push [D•
CLR
] to select VFO mode, if necessary.
w
Set the desired frequency.
e
Set other informations such as tone, duplex, etc. as desired.
r
Push [C•
MR
] for 1 sec. (until emits 3 beeps) after pushing
[A•
FUNC
] to program the information into the displayed memory
channel and return to VFO
• Continue to hold [C•
MR
] down for 1
sec. after 3 beeps emission, to incre-
ment displayed memory channel
number
.
MR