![background image](http://html1.mh-extra.com/html/icom/ic-v8/ic-v8_instruction-manual_2038138025.webp)
40
10
PAGER/CODE SQUELCH
‘
‘
Code programming
D
D
Before programming
The pager and code squelch functions require ID codes and a
group code. These codes are 3-digit DTMF codes and must written
into the code channels before operation.
q
Decide the ID code of each transceiver and a group code for
your group.
w
Decide whether you want to return to normal operation or code
squelch operation after a connection is made.
e
Program the ID code, group code and transmit codes (other sta-
tion’s codes) as below.
D
D
Code channel assignment
*Channel CP automatically memorized an ID code when receiving a
pager call. The contents in channel CP cannot be changed manually.
Optional UT-108 required
ID OR
CODE CHANNEL
“RECEIVE ACCEPT” OR
GROUP CODE
NUMBER
“RECEIVE INHIBIT”
Your ID code
0
“Receive accept” only
Other parties’
1–6
“Receive inhibit” should be
ID code
programmed in each channel.
Group code
One of 1–6
“Receive accept” must be
programmed.
Memory space*
P
“Receive inhibit” only.
39
10
PAGER/CODE SQUELCH
‘
‘
Pager function
This function uses DTMF codes for paging and can be used as a
“message pager” to confirm you of a caller’s identification even
when you leave the transceiver temporarily unattended.
Optional UT-108 required
Pager selective code (push [PTT])
Beep
Beep
Beep
Answer back (manual)
Beep
Beep
Beep
Set both transceivers to either
code squelch or non-coded operation
Communication