![background image](http://html1.mh-extra.com/html/icom/ic-q7a/ic-q7a_instruction-manual_2038062017.webp)
13
5
MEMORY/CALL CHANNELS
■
Programming after selection
q
Select memory mode with [V/M].
w
Set the memory channel to be programmed with [DIAL].
• Rotate [DIAL] while pushing [FUNC] to select a memory channel
in 10 channel steps.
e
Push [V/M] to select VFO mode.
r
Set the desired frequency:
➥
Select the desired band with [BAND].
➥
Set the frequency using [DIAL].
➥
Set other data (e.g. offset frequency, duplex direction,
subaudible tone frequency, etc.), if required.
t
Push [FUNC] + [V/M] for 2 sec. to program into the se-
lected channel.
■
Transferring memory
contents to another memory
q
Select memory mode with [V/M].
w
Set the desired memory channel with [DIAL].
• Rotate [DIAL] while pushing [FUNC] to select a memory channel
in 10 channel steps.
• Call channel contents can be transferred in the same manner.
Select a call channel in this case.
e
Push [FUNC] + [V/M] momentarily to indicate memory
channels.
• Do not hold [FUNC] + [V/M] for more than 0.5 sec., otherwise the
memory channel contents will be transferred to VFO.
r
Rotate [DIAL] to select the desired channel.
• Call channels (C1, C2) and VFO (VF), as well as regular memory
channels, can be transferred in this way.
t
Push [FUNC] + [V/M] for 2 sec. to transfer.
MR
FM
MR
FM
MR
FM
MR
momentarily
Select memory
channel
for 2 sec.
+
V/M
FUNC
+
V/M
V/M
FUNC
blank channel
[EXAMPLE]: Transferring memory channel 3 to 20.