![background image](http://html1.mh-extra.com/html/icom/ic-q7a/ic-q7a_instruction-manual_2038062016.webp)
12
5
MEMORY/CALL CHANNELS
■
General
The transceiver has 200 memory channels in 2 banks and 2
call channels for storage of often-used frequencies.
D
Memory/call channel contents
The following information can be programmed into memory
or call channels:
• Operating frequency (p. 7)
• Receive mode (p. 11)
• Tuning step (p. 7)
• Duplex direction (DUP or – DUP) with an offset frequency
(pgs. 22, 24)
• Subaudible tone encoder or tone squelch ON/OFF (pgs.
23, 26)
• Subaudible tone and tone squelch frequencies (pgs. 23,
26)
• Scan skip setting (p. 18)
■
Programming during selection
q
Select VFO mode with [V/M].
w
Set the desired frequency:
➥
Select the desired band with [BAND].
➥
Set the frequency using [DIAL].
➥
Set other data (e.g. offset frequency, duplex direction,
subaudible tone frequency, etc.), if required.
e
Push [FUNC] + [V/M] momentarily to indicate memory
channels.
• Do not hold [FUNC] + [V/M] for more than 0.5 sec., otherwise the
memory channel will overwrite the selected memory channel.
r
Rotate [DIAL] to select the desired channel.
• Call channels (C1, C2) and VFO (VF), as well as regular memory
channels, can be programmed in this way.
• Rotate [DIAL] while pushing [FUNC] to select a memory channel
in 10 channel steps.
t
Push [FUNC] + [V/M] for 2 sec. to program.
FM
DUP TSQL
MR
FM
DUP TSQL
FM
MR
momentarily
blank channel
for 2 sec.
+
V/M
FUNC
+
V/M
FUNC
[EXAMPLE]: Programming ch 40 during selection.