![background image](http://html1.mh-extra.com/html/icom/ic-q7a/ic-q7a_instruction-manual_2038062036.webp)
32
10
OTHER FUNCTIONS
■
Channel indication mode
Channel indication mode is used to simplify operation. In this
mode only pre-programmed memory channel numbers are
displayed and functions are limited ([POWER], [PTT], [SQL],
[VOL], [LOCK], scanning and the tuning dial are functional).
q
Select memory mode with [V/M].
w
Push [V/M] for 2 sec. to enter expanded set mode.
e
Rotate [DIAL] until “CH” appears.
• Turn the expanded set mode ON for selection. (p. 28)
r
While pushing [FUNC], rotate [DIAL] to turn the channel
indication ON or OFF.
t
Push [V/M] to exit set mode.
• To return to normal indication, turn this function OFF in
step
r
above.
• Frequencies must be programmed into memory channels
in advance.
■
Partial reset
If you want to initialize the operating conditions (VFO fre-
quency, VFO settings, set mode contents) without clearing the
memory contents, a partial resetting function is available for
the transceiver.
➥
While pushing [FUNC] and [V/M], turn power ON to par-
tially reset the transceiver.
■
All reset
Reset the CPU before operating the transceiver for the first
time, or when the internal CPU malfunctions.
➥
While pushing [FUNC], [BAND] and [V/M], turn power ON
to reset the CPU.
• “CLEAR” appears when resetting the CPU.
CAUTION:
Resetting the CPU returns all programmed
contents to their default settings.
FM
Channel indication
mode set mode
Channel indication
mode ON
Channel indication
mode example