![background image](http://html1.mh-extra.com/html/icom/ic-q7a/ic-q7a_instruction-manual_2038062021.webp)
17
6
SCAN OPERATION
■
Selecting scan edges
The scanning range can be set to all frequencies (full scan), a
selected band or between two user-programmed frequencies
(programmed scan).
The programmed scan edges use regular memory chan-
nels. Program the desired scan edge frequencies in mem-
ory channels in advance. (pgs. 12, 13)
q
Select VFO mode with [V/M].
w
Push [V/M] for 2 sec. to enter set mode.
e
Rotate [DIAL] until “EDGE” appears.
• “EDGE” disappears after 1 sec. and the previously selected scan
edge appears.
r
While pushing [FUNC], rotate [DIAL] to select the desired
scan edge.
• Select “ALL” for full scan, “BAND” for
band scan or “0P”–“19P” for pro-
grammed scan.
t
When full or band scan is se-
lected, push [V/M] to exit set
mode.
When a programmed scan is se-
lected, continue with the following
steps to select the band edge fre-
quencies.
y
Push [FUNC] + [
Y
] to select left-
hand scan edge channel.
u
While pushing [FUNC], rotate
[DIAL] to select the desired mem-
ory channel which stores a scan
edge frequency.
• The frequency in the memory chan-
nel is displayed for 1 sec.
i
Push [FUNC] + [
Y
] to select right-
hand scan edge channel.
o
While pushing [FUNC], rotate
[DIAL] to select the desired mem-
ory channel which stores another
scan edge frequency.
!0
Push [V/M] to exit set mode.
• Push [FUNC] + [
Y
] to indicate programmed scan edge for pro-
gramming other scan edges. Repeat
r
,
y
–
o
.
Full scan
Programmed scan 0
(Scan edge channels
198 and 199)
1
Memory channel
frequency is displayed
during selection.