![background image](http://html1.mh-extra.com/html/icom/ic-m90e/ic-m90e_instruction-manual_2038050025.webp)
20
8
SET MODE
New2001
8
D
Battery voltage indicator “bt”
Ths functon controls dsplay or non-dsplay settngs of the
connected battery pack’s voltage when the power s ON.
• The voltage of the connected battery pack s dsplayed for 2 sec.
after power s turned ON.
D
Signal strength indicator “Sl”
The sgnal strength ndcator dsplays receved sgnal
strength as “S-meter.” Ths functon s convenent to check
the sgnal strength vsually.
• The strength s dsplayed at 4 steps.
• The antenna mark and 3 bars appear when recevng strong sgnals.
• The antenna mark only appears when recevng no sgnal.
D
Squelch sensitivity function “SS”
When ths functon s turned ON, blockng aganst nose s m-
proved. Therefore the squelch s not easly affected by nose.
D
Scrambler code “cd”
There are 32 codes (1 to 32) avalable for programmng.
In order to understand each other, all transcevers n your
group must share the same scrambler code.
Push
Battery voltage
ndcaton OFF (default)
Battery voltage
ndcaton ON
Push
Scrambler code 1 (default)
Scrambler code 32
Push
Sgnal strength ndcaton OFF
(default)
Sgnal strength ndcaton ON
Push
Squelch senstvty OFF
(default)
Squelch senstvty ON