15
New2001
LAND (PMR) CHANNEL OPERATION
7
■
LAND (PMR) channel group
A max. of 100 PMR channels (allocated 146.000 to 174.000
MHz) can be programmed nto the LAND channel group for
smple communcaton wth PMR transcevers n the VHF
band.
Moreover, any of the marne channels n the USA*
1
, INT and
ATIS*
2
channel groups can be programmed.
The default settng of the LAND channel group s the same
as that of the INT channel group. Ask your local Icom dealer
for the LAND channel group settng and PMR frequency pro-
grammng detals.
*
1
U.K. verson only, *
2
German verson only
q
Push [DIAL] to select a regular channel.
w
To change the channel group, push [DIAL] for 1 sec. sev-
eral tmes.
• “
” appears when LAND channel group s selected.
e
Push [
Y
]/[
Z
] to select a channel.
• “DUP” appears for duplex channels.
NOTE: The default settngs (e.g. call channel program-
mng) of the LAND channel group are same as the Interna-
tonal and U.S.A. channels. Refer to the approprate pages
for detals.
■
CTCSS and DTCS display
When DTCS or CTCSS s set n the selected channel, the
sub channel readout dsplays as below.
■
VOX function
The VOX functon (voce operated transmsson) starts trans-
msson wthout pushng [PTT] when you speak nto the
mcrophone; then automatcally returns to receve when you
stop speakng (hands-free operaton becomes possble).
NOTE: An optonal headset and headset adapter s re-
qured for the VOX operaton.
➥
Push and hold [SQL•
MONI
], then push [H/Lo•
] to turn
the VOX functon ON/OFF whle connectng the optonal
headset and headset adapter to [MIC/SP] connector.
• “VOX” appears on the LCD whle the VOX functon turns ON.
• The “VOX gan” and “VOX delay” can be set n the SET mode.
(p. 21)
Push for 1 sec.
several tmes.
Appears when DTCS s set.
Appears when CTCSS s set.
