![background image](http://html1.mh-extra.com/html/icom/ic-m90e/ic-m90e_instruction-manual_2038050008.webp)
3
2
SUPPLIED ACCESSORIES AND ATTACHMENTS
New2001
D
Battery pack
To remove the battery pack:
Turn the screw counterclockwse, then pull the battery pack
n the drecton of the arrow as shown below.
To attach the battery pack:
Insert the battery pack n the IC-M90E completely, then turn
the screw clockwse.
NEVER remove or nsert the battery pack when the trans-
cever s wet or soled. Ths may result water or dust get-
tng nto the transcever/battery pack and may result n the
transcever beng damaged.
NOTE: When removng or attachng the battery pack, use
a con or flat-blade screwdrver to loosen or tghten the
bottom screw.
CAUTION:
When attachng or removng a battery pack, make sure
the rubber seal s set n the groove of the battery pack
correctly. If the seal s not neatly n the groove t may be
damaged when attachng the battery pack.
If the seal s damaged, waterproofing s not guaranteed.
OPEN
LO
CK
Screw poston
when removng battery
Screw poston
when attachng battery
OPEN
LO
CK
Make sure both the rubber seal (purple) s set to the groove
correctly and dust or else does not adhere to t.
Battery pack
Battery pack
Rubber seal
Groove
Correct position
Incorrect position
NOTE:
When attachng a battery pack, make sure dust or else does
not adhere to the rubber seal. If dust or else s on the seal
when attachng a battery pack, the water resstant may be
reduced.
NOTE: When the lock screw does not easly (feels tght),
check to ensure the battery pack s sufficently nserted to
the transcever.
DO NOT
bang or cause hgh mpact to
the battery pack, as ths may damage the battery pack/or
the transcever.