27
New2001
OPTIONAL SPEAKER-MICROPHONE
11
■
HM-125 descriptions
NEVER mmerse the connector n water wthout connectng
wth the transcever. If the connector becomes wet, be sure
to dry BEFORE attachng t to the transcever.
NOTE: The mcrophone s located at the top of the
speaker-mcrophone, as shown n the dagram above.
To maxmze the readablty of your transmtted sgnal
(voce), hold the mcrophone approx. 5 to 10 cm from your
mouth, and speak n a normal voce level.
■
Attachment
Insert the speaker-mc connector onto the [MIC/SP] con-
nector and carefully screw t tght, as shown n the dagram
below. Be careful not to cross thread the connecton.
IMPORTANT: KEEP the transcever’s [MIC/SP] connector
cap attached when the speaker-mcrophone s not n use.
Water wll not get nto the transcever even f the cover s
not attached, however, the termnals (pns) wll become
rusty, or the transcever wll functon abnormally f the
connector has become wet.
Alligator type clip
To attach the speaker-mc.
to your shrt or collar, etc.
PTT switch
Transmts durng push.
Receves durng release.
Microphone
Speaker
Set the trangle
mark to the front
sde.
CAUTION: Attach the speaker-mcrophone’
s connector securely to prevent accdental
droppng, or water ntruson n the connector.
Detaching:
Pull up the cap
n the drecton
of the arrow to
detach t.
Attaching:
Attach the cap
n the drecton
of the arrow
completely.
