![background image](http://html1.mh-extra.com/html/icom/ic-m604a/ic-m604a_instruction-manual_2037992053.webp)
47
8
SET MODE
7
8
■
Set mode programming
The Set mode is used to change the settings of the
transceiver’s functions: Scan type, Scan resume timer, Weather
alert, Beep tone, Internal speaker, LCD contrast, Attenuation
level, Automatic foghorn frequency, Radio power*
1
, Scrambler
type*
2
, Scrambler code*
2
, Favorite channel and Remote ID.
*
1
Displayed only when an optional COMMANDMIC™ is connected.
*
2
Displayed only when an optional scrambler unit is installed.
Selectable functions may differ, depending on dealer setting.
q
Turn OFF the transceiver, then while holding down
[16•9]
,
push
[POWER]
to enter the Set mode.
w
After the screen is displayed, release
[16•9]
.
e
Rotate
[SELECTOR]
to select the desired item, then push
[ENT]
.
r
Rotate
[SELECTOR]
to select the desired setting of the
item, then push
[ENT]
to set.
t
Push
[CLR]
, or rotate
[SELECTOR]
to select “
Exit
” then
push
[ENT]
to exit the Set mode and return to the normal
operating mode.
Rotate
• SET MODE CONSTRUCTION
■
Set mode items
D
Scan type
The transceiver has 2 scan types: normal scan and priority
scan. Normal scan searches all TAG channels in the
selected channel group. Priority scan sequentially searches
all TAG channels while monitoring Channel 16.
(Default: Normal)
D
Scan resume timer
The scan resume timer can be selected as a pause (OFF)
or timer scan (ON). When OFF is selected, the scan pauses
until the signal disappears. When ON is selected, the scan
pauses 5 seconds and then resumes, even if a signal has
been received on any channel other than Channel 16.
(Default: OFF)