26
6
DSC OPERATION
■
Transmitting DSC Calls (Continued)
D
Transmitting a Group Call
The Group Call function allows you to transmit a DSC signal
to only a specific group.
q
Enter “
Group Call
” in the DSC menu.
DSC Menu
➪
Group Call
(Push
[MENU]
) (Rotate
[SELECTOR]
, then push
[ENT]
.)
w
Rotate
[SELECTOR]
to select the desired preset group
address or “
Manual Input
,” then push
[ENT]
.
• The ID code for the Group Call can be set first. (p. 17)
• When “
Manual Input
” is selected, set the 8 digit ID code
for the group you wish to call using keypad keys.
e
Rotate
[SELECTOR]
to select a desired intership channel
or “
Manual Input
,” then push
[ENT]
.
• Intership channels are already preset into the transceiver in
recommended order.
The first one digit is specified ‘0’ for a Group ID.
The first two digits are ‘0’ for any Coast station ID.
r
Push
[ENT]
to transmit the Group Call.
• If Channel 70 is busy, the transceiver stands by until the
channel becomes clear.
t
After the Group Call has been transmitted, the following
message is displayed.
y
Push
[CLR]
to exit and the transceiver automatically
selects the intership channel specified in step
e
.
• Even if
[CLR]
has not been pushed, the transceiver
automatically
selects the specified intership channel in step
e
after 2 seconds of inactivity.
